Certification Training for High Pressure CO₂ System

This course covers the agent, components and auxiliary peripherals for typical applications of a High Pressure CO₂ system.   Also covered are conducting a hazard analysis, design and installation, and codes and standards. Inspection, service, maintenance and recharge of the system are detailed.   On day three, attendees will work through examples of piping and nozzle calculations using the calculation software. 

The course will end with an exam and attendees will receive a product certification which will allow them to service and maintain the High Pressure CO₂ Fire Suppression System.

Highlights

• Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the High Pressure CO₂ Fire Suppression System

Course Information

• Duration: 3 days (Service and Maintenance 2-day, Design 1-day)
• Target Audience: Authorized Distributors Only
• Certification: 3-year Product Certification

Certification Training for INERGEN 150/200 Bar Fire Suppression System Design

This course is the last day of the three day training program, for those who will be designing INERGEN systems. Students will obtain hands-on training by participating in example work problems and running piping calculations using the INERGEN Calculation Software. Attendees who attend the design program will receive a certification for design, installation, service, maintenance, and recharge.

The course will end with an exam and attendees will receive a product certification which will allow them to design, service and maintain the INERGEN 150/200 Fire Suppression System.

Highlights

• Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the INERGEN 150/200  Bar Fire Suppression System

Course Information

• Duration: 1 day
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for INERGEN 150/200 Bar Fire Suppression System Service and Maintenance

This course is the first two days of a three day training program, intended for designers, installers and service technicians. Heavy emphasis on NFPA and FSSA requirements as they pertain to service and maintenance.  Attendees will learn about the agent, and how to conduct a hazard analysis. They will be able to identify component and auxiliary peripherals, and properly conduct inspection service, maintenance service and recharge of the INERGEN system.

The course will end with an exam and attendees will receive a product certification which will allow them to service and maintain the INERGEN 150/200 Fire Suppression System.

Highlights

• Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the INERGEN 150/200 Ber Fire Suppression System

Course Information

• Duration: 2-days
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for INERGEN 300 Bar with iFLow Technology Design

This course is the last day of the three day training program, for those who will be designing INERGEN systems. Students will obtain hands-on training by participating in example work problems and running piping calculations using the INERGEN 300 Bar Calculation Software. 
The course will end with an exam and attendees will receive a product certification which will allow them to design, service and maintain the INERGEN 300 Bar with iFlow Technology Fire Suppression System.

Highlights

• Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the INERGEN 300 Bar with iFlow Technology Fire Suppression System

Course Information

• Duration: 1-day
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for INERGEN 300 Bar with iFLow Technology Service and Maintenance

This course is the first two days of a three day training program, intended for designers, installers and service technicians. Heavy emphasis on NFPA and FSSA requirements as they pertain to service and maintenance.  Attendees will learn about the agent, and how to conduct a hazard analysis. They will be able to identify component and auxiliary peripherals, and properly conduct inspection service, maintenance service and recharge of the INERGEN 300 Bar with iFlow Technology system.

The course will end with an exam and attendees will receive a product certification which will allow them to service and maintain the INERGEN 300 Bar with iFlow Technology Fire Suppression System.

Highlights

• Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the INERGEN 300 Bar with iFlow Technology Fire Suppression System

Course Information

• Duration: 2-days
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for ANSUL Large Dry Chemical Piped and Skid Systems Service and Maintenance

This course is a comprehensive introduction to the inspection, service, and maintenance of ANSUL Large Dry Chemical Systems (LDC). Students will learn semi annual and annual maintenance procedures as it pertains to NFPA 17, how to correctly recharge a LDC system and put it into operation, service and maintenance best practices, use and limitations of the various suppression agents, and how to effectively use the product manual and other technical information.

A grade of 80% or higher on the exam at the end of class will earn students a 3-year product certification on the service and maintenance of ANSUL Large Dry Chemical Piped and Skid Systems.

Course Information

• Duration: 1-day, approx. 6 hours
• Target Audience: Authorized Distributors Only
• Certification: 3-year Product Certification

Certification Training for Low Pressure CO₂ System

This course covers the agent, components and auxiliary peripherals for typical applications of a Low Pressure CO₂ system. Attendees must have successfully completed the High Pressure CO₂ course before taking this course.  Also covered are conducting a hazard analysis, design and installation, and codes and standards. Inspection, service, maintenance and recharge of the system are detailed.  Attendees will work through examples of piping and nozzle calculations using the mini-bulk calculation software. 

The course will end with an exam and attendees will receive a product certification which will allow them to design, service and maintain the Low Pressure CO₂ Fire Suppression System.

Highlights

•  Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the Low Pressure CO₂ Fire Suppression System

Course Information

• Duration: 1-day
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for System Design

This course is the last day of a three-day training program, intended for designers, installers and service technicians.  Heavy emphasis on NFPA and FSSA requirements as they pertain to design, service and maintenance.

On this day, attendees will work through examples of piping and nozzle calculations using the SAPPHIRE PLUS calculation software, the Suppression Design Center (SDC).

The course will end with an exam and attendees will receive a product certification which will allow them to design, service and maintain the SAPPHIRE PLUS Fire Suppression System.

Highlights

• Attendees will work through real life scenarios to apply what they learned
• Attendees will become more familiar with the technical manual and where to find the information they need to design, service and maintain the SAPPHIRE PLUS Fire Suppression System.

Course Information

• Duration: 1 day
• Availability: USA
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for Service and Maintenance

This course is the first two days of a three-day training program, intended for designers, installers and service technicians.  Heavy emphasis on NFPA and FSSA requirements as they pertain to service and maintenance.

Attendees will learn about the agent, and how to conduct a hazard analysis.  They will be able to identify component and auxiliary peripherals, properly conduct inspection service, maintenance service and recharge of the SAPPHIRE PLUS Fire Suppression System.

The course will end with an exam and attendees will receive a product certification which will allow them to service and maintain the SAPPHIRE PLUS Fire Suppression System.

Highlights

• Attendees will work through real life scenarios to apply what they learned
• Attendees will become more familiar with the technical manual and where to find the information they need to design, service and maintain the SAPPHIRE PLUS Fire Suppression System.

Course Information

• Duration: 2 days
• Availability: USA
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

To enroll in this class or find out more information, login to your account at the top of this page.

Certification Training for Sapphire and FM200 Fire Suppression System Design

This course is the last day of a three day training program, intended for designers, installers and service technicians. Heavy emphasis on NFPA and FSSA requirements as they pertain to design, service and maintenance.  On this day, attendees will work through examples of piping and nozzle calculations using the SAPPHIRE calculation software.

The course will end with an exam and attendees will receive a dual product certification which will allow them to design, service and maintain the SAPPHIRE and FM200 Fire Suppression Systems.

Highlights

• Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the SAPPHIRE and FM200 Fire Suppression System

Course Information

• Duration: 1 day
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for SAPPHIRE and FM200 Fire Suppression System Service and Maintenance

This course is the first two days of a three day training program, intended for designers, installers and service technicians. Heavy emphasis on NFPA and FSSA requirements as they pertain to service and maintenance.  Attendees will learn about the agent, and how to conduct a hazard analysis. Also covered are the differences for the FM200 system. They will be able to identify component and auxiliary peripherals,  and properly conduct inspection service, maintenance service and recharge of the SAPPHIRE and FM200 systems.

The course will end with an exam and attendees will receive a dual product certification which will allow them to service and maintain both the SAPPHIRE and FM200 Fire Suppression System.

Highlights

• Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the SAPPHIRE and FM200  Fire Suppression Systems

Course Information

• Duration: 2 days
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for High Pressure CO₂ System

This course covers the agent, components and auxiliary peripherals for typical applications of a High Pressure CO₂ system. 
Also covered are conducting a hazard analysis, design and installation, and codes and standards. Inspection, service, maintenance and recharge of the system are detailed. 
On day three, attendees will work through examples of piping and nozzle calculations using the calculation software. 
The course will end with an exam and attendees will receive a product certification which will allow them to service and maintain the High Pressure CO₂ Fire Suppression System.

Highlights

•  Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the High Pressure CO₂ Fire Suppression System

Course Information

•  Duration: 3 days
• Availability: USA, APAC / ME, Europe / Africa
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for INERGEN 150/200 Bar Fire Suppression System Design

This course is the last day of the three day training program, for those who will be designing INERGEN systems. Students will obtain hands-on training by participating in example work problems and running piping calculations using the INERGEN Calculation Software. Attendees who attend the design program will receive a certification for design, installation, service, maintenance, and recharge.The course will end with an exam and attendees will receive a product certification which will allow them to design, service and maintain the INERGEN 150/200 Fire Suppression System.

Highlights

•  Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the INERGEN 150/200  Bar Fire Suppression System

Course Information

•  Duration: 1 day
• Availability: USA, APAC / ME
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for INERGEN 150/200 Bar Fire Suppression System Service and Maintenance

This course is the first two days of a three day training program, intended for designers, installers and service technicians. Heavy emphasis on NFPA and FSSA requirements as they pertain to service and maintenance. 
Attendees will learn about the agent, and how to conduct a hazard analysis. They will be able to identify component and auxiliary peripherals, and properly conduct inspection service, maintenance service and recharge of the INERGEN system.
The course will end with an exam and attendees will receive a product certification which will allow them to service and maintain the INERGEN 150/200 Fire Suppression System.

Highlights

• Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the INERGEN 150/200 Ber Fire Suppression System

Course Information

• Duration: 2 days
• Availability: USA, APAC / ME
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for INERGEN 300 Bar with iFLow Technology Design

This course is the last day of the three day training program, for those who will be designing INERGEN systems. Students will obtain hands-on training by participating in example work problems and running piping calculations using the INERGEN 300 Bar Calculation Software. 
Attendees who attend the design program will receive a certification for design, installation, service, maintenance, and recharge.
The course will end with an exam and attendees will receive a product certification which will allow them to design, service and maintain the INERGEN 300 Bar with iFlow Technology Fire Suppression System.

Highlights

• Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the INERGEN 300 Bar with iFlow Technology Fire Suppression System

Course Information

• Duration: 1 day
• Availability: USA, APAC / ME
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for INERGEN 300 Bar with iFLow Technology Service and Maintenance

This course is the first two days of a three day training program, intended for designers, installers and service technicians. Heavy emphasis on NFPA and FSSA requirements as they pertain to service and maintenance. 
Attendees will learn about the agent, and how to conduct a hazard analysis. They will be able to identify component and auxiliary peripherals, and properly conduct inspection service, maintenance service and recharge of the INERGEN 300 Bar with iFlow Technology system.
The course will end with an exam and attendees will receive a product certification which will allow them to service and maintain the INERGEN 300 Bar with iFlow Technology Fire Suppression System.

Highlights

•  Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the INERGEN 300 Bar with iFlow Technology Fire Suppression System

Course Information

•  Duration: 2 days
• Availability: USA, APAC / ME
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for Low Pressure CO₂ System

This course covers the agent, components and auxiliary peripherals for typical applications of a Low Pressure CO₂ system. Attendees must have successfully completed the High Pressure CO₂ course before taking this course.
Also covered are conducting a hazard analysis, design and installation, and codes and standards. Inspection, service, maintenance and recharge of the system are detailed. 
Attendees will work through examples of piping and nozzle calculations using the mini-bulk calculation software. 
The course will end with an exam and attendees will receive a product certification which will allow them to design, service and maintain the Low Pressure CO₂ Fire Suppression System.

Highlights

•  Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the Low Pressure CO₂ Fire Suppression System

Course Information

•  Duration: 1 day
• Availability: USA, APAC / ME
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for Sapphire and FM200 Fire Suppression System Design

This course is the last day of a three day training program, intended for designers, installers and service technicians. Heavy emphasis on NFPA and FSSA requirements as they pertain to design, service and maintenance.
On this day, attendees will work through examples of piping and nozzle calculations using the SAPPHIRE calculation software.
The course will end with an exam and attendees will receive a dual product certification which will allow them to design, service and maintain the SAPPHIRE and FM200 Fire Suppression Systems.

Highlights

• Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the SAPPHIRE and FM200 Fire Suppression System

Course Information

• Duration: 1 day
• Availability: USA, APAC / ME
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for SAPPHIRE and FM200 Fire Suppression System Service and Maintenance

This course is the first two days of a three day training program, intended for designers, installers and service technicians. Heavy emphasis on NFPA and FSSA requirements as they pertain to service and maintenance. 
Attendees will learn about the agent, and how to conduct a hazard analysis. Also covered are the differences for the FM200 system. They will be able to identify component and auxiliary peripherals,  and properly conduct inspection service, maintenance service and recharge of the SAPPHIRE and FM200 systems.
The course will end with an exam and attendees will receive a dual product certification which will allow them to service and maintain both the SAPPHIRE and FM200 Fire Suppression System.

Highlights

•  Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the SAPPHIRE and FM200  Fire Suppression Systems

Course Information

•  Duration: 2 days
• Availability: USA, APAC / ME
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training – in cooperation with FIA

According to EC/842/2006 all businesses working with - and therefore having personal handling, servicing, commissioning - systems containing any fluorinating gases (F-Gases) will be required to attend official training.
This course is an official certification course approved by FIA (UK), fulfilling the requirements for technician training under the company certification scheme, working with F-­Gases, detailing the European Regulations for safe handling of fluorinated gases and their recovery, equipment and testing.
The first half day (called manufacturer practical session) will cover on how to identify potential leakage from equipment containing "F"-Gases relating to FM200 Systems.
The second part of the day (called FIA theoretical session) will be the official certification for individuals.
Each part of the course will end with an exam and passing, the attendees will receive a product certification and the official FIA certification.

Highlights

•  Attend both theory and practical session in one go

Course Information (CTT08FM)

• Duration: 1 day
• Availability: TechXchange Academy Manchester / UK; On-Site at Customer
• Target Audience: Open Enrollment
• Certification: Product Certification

Certification Training – Combined for SAPPHIRE and FM200 Fire Suppression System

This 2 day course will cover an overview of the Sapphire and FM200 system hardware, operational requirements, fill station equipment required, inspection, detailed fill instructions (25 bar and 42 bar systems), leak checking, container packing details, labeling, calibration of devices, low pressure switch installation, nozzle drilling and valve assembly and refurbishment.
The course will end with an exam and attendees will receive a product certification.

Highlights

• Students will obtain hands-on training
• Fill Station Equipment - Proposal upon request (via Sales)

Course Information (CTT03CAFN)

• Duration: 2 days
• Availability: Great Yarmouth, UK
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Practical Training for Gaseous Systems Inert & SAPPHIRE & FM200 Systems - Combined Course

This 1 day course will cover the different hardware for the systems in questions.
Attendees will learn how to properly conduct inspection, service and maintenance.

The course will end with an exam and attendees will receive a certification of attendance.

Highlights

• Students will obtain hands-on training
• Service schedules and procedures will be shared

Course Information (CTT34GA)

• Duration: 1 day
• Availability: TechXchange Academy Manchester and Madrid
• Target Audience: Authorized Distributors Only
• Certification: Certificate of Attendance

Certification Training for High Pressure CO₂ System

This course covers the agent, components and auxiliary peripherals for typical applications of a High Pressure CO₂ system. 
Also covered are conducting a hazard analysis, design and installation, and codes and standards. Inspection, service, maintenance and recharge of the system are detailed. 
On day three, attendees will work through examples of piping and nozzle calculations using the calculation software. 
The course will end with an exam and attendees will receive a product certification which will allow them to service and maintain the High Pressure CO₂ Fire Suppression System.

Highlights

• Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the High Pressure CO₂ Fire Suppression System

Course Information (CTT02CO)

•  Duration: 2 days (Software 1 add-on day)
• Availability: TechXchange Academies Europe; On-Site at Customer
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for Inert Systems with Orifice Union or iFLow Technology

This 2 day course will cover the different Inert agents (Nitrogen, Argon, IG55, Inergen), environmental and human safety considerations and the applications those systems are used for. 
Attendees will learn how to conduct a hazard analysis, get to know the hardware and auxiliary peripherals required, run through the steps to design a system and learn on how to properly conduct inspection service, maintenance service and recharge of the Inert system.

The course will end with an exam and attendees will receive a product certification which will allow them to design, service and maintain the Inert Clean Agent Fire Suppression Systems.

Highlights

• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the Inert Clean Agent Fire Suppression System
• Students will obtain hands-on training by participating in example work problems
• Additional Add-On Software day available on running piping calculations using the Hydraulic calculation program.

Course Information (CTT02IN)

• Duration: 2 days (Software 1 add-on day)
• Availability: TechXchange Academies Europe; On-Site at Customer
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for SAPPHIRE & FM200 Systems - Combined Course

This 2 day course will cover the different agents (Novec and FM200), environmental and human safety considerations and the applications those systems are used for. 
Attendees will learn how to conduct a hazard analysis, get to know the hardware and auxiliary peripherals required, run through the steps to design a system and learn on how to properly conduct inspection, service and maintenance of the SAPPHIRE & FM200 system.

The course will end with an exam and attendees will receive a product certification which will allow them to design, service and maintain the SAPPHIRE & FM200 Clean Agent Fire Suppression  Systems.

Highlights

• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the SAPPHIRE & FM200 Clean Agent Fire Suppression System
• Students will obtain hands-on training by participating in example work problems
• Additional Add-On Software day available on running piping calculations using the Hydraulic calculation program.

Course Information (CTT02CO)

• Duration: 2 days (Software 1 add-on day)
• Availability: TechXchange Academies Europe; On-site at Customer
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for SAPPHIRE Systems

This 3 day course will cover the Novec agent, environmental and human safety considerations and the applications those systems are used for. 

Attendees will learn how to conduct a hazard analysis, get to know the hardware and auxiliary peripherals required, run through the steps to design a system and learn on how to properly conduct inspection, service and maintenance of the SAPPHIRE System.

The course will end with an exam and attendees will receive a product certification which will allow them to design, service and maintain the SAPPHIRE  Clean Agent Fire Suppression  Systems.

System types covered include 25 bar, 42 bar and 70 bar.

Highlights

• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the SAPPHIRE Clean Agent Fire Suppression System
• Students will obtain hands-on training by participating in example work problems
• Additional Add-On Software day available on running piping calculations using the Hydraulic calculation program

Course Information (CTT02SAP)

• Duration: 3 days (Software 1 add-on day)
• Availability: TechXchange Academies Europe; On-site at Customer
• Target Audience: Authorized Distributors Only
• Certification: Product Certification