Certification Training for High Pressure CO₂ System

This course covers the agent, components and auxiliary peripherals for typical applications of a High Pressure CO₂ system.   Also covered are conducting a hazard analysis, design and installation, and codes and standards. Inspection, service, maintenance and recharge of the system are detailed.   On day three, attendees will work through examples of piping and nozzle calculations using the calculation software. 

The course will end with an exam and attendees will receive a product certification which will allow them to service and maintain the High Pressure CO₂ Fire Suppression System.

Highlights

• Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the High Pressure CO₂ Fire Suppression System

Course Information

• Duration: 3 days (Service and Maintenance 2-day, Design 1-day)
• Target Audience: Authorized Distributors Only
• Certification: 3-year Product Certification

Certification Training for INERGEN 150/200 Bar Fire Suppression System Design

This course is the last day of the three day training program, for those who will be designingINERGEN systems. Students will obtain hands-on training by participating in example work problems and running piping calculations using the INERGEN Calculation Software. Attendees who attend the design program will receive a certification for design, installation, service, maintenance, and recharge.

The course will end with an exam and attendees will receive a product certification which will allow them to design, service and maintain the INERGEN 150/200 Fire Suppression System.

Highlights

• Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the INERGEN 150/200 Bar Fire Suppression System

Course Information

• Duration: 1 day
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for INERGEN 150/200 Bar Fire Suppression System Service and Maintenance

This course is the first two days of a three day training program, intended for designers,installers and service technicians. Heavy emphasis on NFPA and FSSA requirements as they pertain to service and maintenance.  Attendees will learn about the agent, and how to conduct a hazard analysis. They will be able to identify component and auxiliary peripherals, and properly conduct inspection service, maintenance service and recharge of the INERGEN system.

The course will end with an exam and attendees will receive a product certification which will allow them to service and maintain the INERGEN 150/200 Fire Suppression System.

Highlights

• Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the INERGEN 150/200 Ber Fire Suppression System

Course Information

• Duration: 2-days
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for INERGEN 300 Bar with IGS Technology Service and Maintenance

This course is the first two days of a three-day training program, intended for designers, installers and service technicians. Heavy emphasis on NFPA and FSSA requirements as they pertain to service and maintenance.  Attendees will learn about the agent, and how to conduct a hazard analysis. They will be able to identify component and auxiliary peripherals, and properly conduct inspection service, maintenance service and recharge of the INERGEN 300 Bar with IGS Technology system.

The course will end with an exam and attendees will receive a product certification which will allow them to service and maintain the INERGEN 300 Bar with IGS Technology Fire Suppression System.

Highlights

• Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the INERGEN 300 Bar with IGS Technology Fire Suppression System

Course Information

• Duration: 2-days
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for INERGEN 300 Bar with IGS Technology Design

This course is the last day of the three-day training program, for those who will be designing INERGEN systems. Students will obtain hands-on training by participating in example work problems and running piping calculations using the INERGEN 300 Bar Calculation Software. 
The course will end with an exam and attendees will receive a product certification which will allow them to design, service and maintain the INERGEN 300 Bar with IGS Technology Fire Suppression System.

Highlights

• Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the INERGEN 300 Bar with IGS Technology Fire Suppression System

Course Information

• Duration: 1-day
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for ANSUL Large Dry Chemical Piped and Skid Systems Service and Maintenance

This course is a comprehensive introduction to the inspection, service, and maintenance of ANSUL Large Dry Chemical Systems (LDC). Students will learn semi-annual and annual maintenance procedures as it pertains to NFPA 17, how to correctly recharge a LDC system and put it into operation, service and maintenance best practices, use and limitations of the various suppression agents, and how to effectively use the product manual and other technical information.

A grade of 80% or higher on the exam at the end of class will earn students a 3-year product certification on the service and maintenance of ANSUL Large Dry Chemical Piped and Skid Systems.

Course Information

• Duration: 1-day, approx. 6 hours
• Target Audience: Authorized Distributors Only
• Certification: 3-year Product Certification

Certification Training for Low Pressure CO₂ System

This course covers the agent, components and auxiliary peripherals for typical applications of a Low Pressure CO₂ system. Attendees must have successfully completed the High Pressure CO₂ course before taking this course.  Also covered are conducting a hazard analysis, design and installation, and codes and standards. Inspection, service, maintenance and recharge of the system are detailed.  Attendees will work through examples of piping and nozzle calculations using the mini-bulk calculation software. 

The course will end with an exam and attendees will receive a product certification which will allow them to design, service and maintain the Low Pressure CO₂ Fire Suppression System.

Highlights

•  Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the Low Pressure CO₂ Fire Suppression System

Course Information

• Duration: 1-day
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for System Design

This course is the last day of a three-day training program, intended for designers, installers and service technicians.  Heavy emphasis on NFPA and FSSA requirements as they pertain to design, service and maintenance.

On this day, attendees will work through examples of piping and nozzle calculations using the SAPPHIRE PLUS calculation software, the Suppression Design Center (SDC).

The course will end with an exam and attendees will receive a product certification which will allow them to design, service and maintain the SAPPHIRE PLUS Fire Suppression System.

Highlights

• Attendees will work through real life scenarios to apply what they learned
• Attendees will become more familiar with the technical manual and where to find the information they need to design, service and maintain the SAPPHIRE PLUS Fire Suppression System.

Course Information

• Duration: 1 day
• Availability: USA
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for Service and Maintenance

This course is the first two days of a three-day training program, intended for designers, installers and service technicians.  Heavy emphasis on NFPA and FSSA requirements as they pertain to service and maintenance.

Attendees will learn about the agent, and how to conduct a hazard analysis.  They will be able to identify component and auxiliary peripherals, properly conduct inspection service, maintenance service and recharge of the SAPPHIRE PLUS Fire Suppression System.

The course will end with an exam and attendees will receive a product certification which will allow them to service and maintain the SAPPHIRE PLUS Fire Suppression System.

Highlights

• Attendees will work through real life scenarios to apply what they learned
• Attendees will become more familiar with the technical manual and where to find the information they need to design, service and maintain the SAPPHIRE PLUS Fire Suppression System.

Course Information

• Duration: 2 days
• Availability: USA
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

To enroll in this class or find out more information, login to your account at the top of this page.

Certification Training for Sapphire and FM200 Fire Suppression System Design

This course is the last day of a three day training program, intended for designers, installers and service technicians. Heavy emphasis on NFPA and FSSA requirements as they pertain to design, service and maintenance.  On this day, attendees will work through examples of piping and nozzle calculations using the SAPPHIRE calculation software.

The course will end with an exam and attendees will receive a dual product certification which will allow them to design, service and maintain the SAPPHIRE and FM200 Fire Suppression Systems.

Highlights

• Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the SAPPHIRE and FM200 Fire Suppression System

Course Information

• Duration: 1 day
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for SAPPHIRE and FM200 Fire Suppression System Service and Maintenance

This course is the first two days of a three-day training program, intended for designers, installers and service technicians. Heavy emphasis on NFPA and FSSA requirements as they pertain to service and maintenance.  Attendees will learn about the agent, and how to conduct a hazard analysis. Also covered are the differences for the FM200 system. They will be able to identify component and auxiliary peripherals, and properly conduct inspection service, maintenance service and recharge of the SAPPHIRE and FM200 systems.

The course will end with an exam and attendees will receive a dual product certification which will allow them to service and maintain both the SAPPHIRE and FM200 Fire Suppression System.

Highlights

• Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the SAPPHIRE and FM200 Fire Suppression Systems

Course Information

• Duration: 2 days
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for High Pressure CO₂ System

This course covers the agent, components and auxiliary peripherals for typical applications of a High Pressure CO₂ system. 
Also covered are conducting a hazard analysis, design and installation, and codes and standards. Inspection, service, maintenance and recharge of the system are detailed. 
On day three, attendees will work through examples of piping and nozzle calculations using the calculation software. 
The course will end with an exam and attendees will receive a product certification which will allow them to service and maintain the High Pressure CO₂ Fire Suppression System.

Highlights

•  Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the High Pressure CO₂ Fire Suppression System

Course Information

•  Duration: 3 days
• Availability: USA, APAC / ME, Europe / Africa
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for INERGEN 150/200 Bar Fire Suppression System Design

This course is the last day of the three day training program, for those who will be designing INERGEN systems. Students will obtain hands-on training by participating in example work problems and running piping calculations using the INERGEN Calculation Software. Attendees who attend the design program will receive a certification for design, installation, service, maintenance, and recharge.The course will end with an exam and attendees will receive a product certification which will allow them to design, service and maintain the INERGEN 150/200 Fire Suppression System.

Highlights

•  Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the INERGEN 150/200  Bar Fire Suppression System

Course Information

•  Duration: 1 day
• Availability: USA, APAC / ME
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for INERGEN 150/200 Bar Fire Suppression System Service and Maintenance

This course is the first two days of a three day training program, intended for designers, installers and service technicians. Heavy emphasis on NFPA and FSSA requirements as they pertain to service and maintenance. 
Attendees will learn about the agent, and how to conduct a hazard analysis. They will be able to identify component and auxiliary peripherals, and properly conduct inspection service, maintenance service and recharge of the INERGEN system.
The course will end with an exam and attendees will receive a product certification which will allow them to service and maintain the INERGEN 150/200 Fire Suppression System.

Highlights

• Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the INERGEN 150/200 Ber Fire Suppression System

Course Information

• Duration: 2 days
• Availability: USA, APAC / ME
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for INERGEN 300 Bar with iFLow Technology Design

This course is the last day of the three day training program, for those who will be designing INERGEN systems. Students will obtain hands-on training by participating in example work problems and running piping calculations using the INERGEN 300 Bar Calculation Software. 
Attendees who attend the design program will receive a certification for design, installation, service, maintenance, and recharge.
The course will end with an exam and attendees will receive a product certification which will allow them to design, service and maintain the INERGEN 300 Bar with iFlow Technology Fire Suppression System.

Highlights

• Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the INERGEN 300 Bar with iFlow Technology Fire Suppression System

Course Information

• Duration: 1 day
• Availability: USA, APAC / ME
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for INERGEN 300 Bar with iFLow Technology Service and Maintenance

This course is the first two days of a three day training program, intended for designers, installers and service technicians. Heavy emphasis on NFPA and FSSA requirements as they pertain to service and maintenance. 
Attendees will learn about the agent, and how to conduct a hazard analysis. They will be able to identify component and auxiliary peripherals, and properly conduct inspection service, maintenance service and recharge of the INERGEN 300 Bar with iFlow Technology system.
The course will end with an exam and attendees will receive a product certification which will allow them to service and maintain the INERGEN 300 Bar with iFlow Technology Fire Suppression System.

Highlights

•  Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the INERGEN 300 Bar with iFlow Technology Fire Suppression System

Course Information

•  Duration: 2 days
• Availability: USA, APAC / ME
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for Low Pressure CO₂ System

This course covers the agent, components and auxiliary peripherals for typical applications of a Low Pressure CO₂ system. Attendees must have successfully completed the High Pressure CO₂ course before taking this course.
Also covered are conducting a hazard analysis, design and installation, and codes and standards. Inspection, service, maintenance and recharge of the system are detailed. 
Attendees will work through examples of piping and nozzle calculations using the mini-bulk calculation software. 
The course will end with an exam and attendees will receive a product certification which will allow them to design, service and maintain the Low Pressure CO₂ Fire Suppression System.

Highlights

•  Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the Low Pressure CO₂ Fire Suppression System

Course Information

•  Duration: 1 day
• Availability: USA, APAC / ME
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for Sapphire and FM200 Fire Suppression System Design

This course is the last day of a three day training program, intended for designers, installers and service technicians. Heavy emphasis on NFPA and FSSA requirements as they pertain to design, service and maintenance.
On this day, attendees will work through examples of piping and nozzle calculations using the SAPPHIRE calculation software.
The course will end with an exam and attendees will receive a dual product certification which will allow them to design, service and maintain the SAPPHIRE and FM200 Fire Suppression Systems.

Highlights

• Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the SAPPHIRE and FM200 Fire Suppression System

Course Information

• Duration: 1 day
• Availability: USA, APAC / ME
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Certification Training for SAPPHIRE and FM200 Fire Suppression System Service and Maintenance

This course is the first two days of a three day training program, intended for designers, installers and service technicians. Heavy emphasis on NFPA and FSSA requirements as they pertain to service and maintenance. 
Attendees will learn about the agent, and how to conduct a hazard analysis. Also covered are the differences for the FM200 system. They will be able to identify component and auxiliary peripherals,  and properly conduct inspection service, maintenance service and recharge of the SAPPHIRE and FM200 systems.
The course will end with an exam and attendees will receive a dual product certification which will allow them to service and maintain both the SAPPHIRE and FM200 Fire Suppression System.

Highlights

•  Attendees will work through real life scenarios to apply what they learned
• Attendees will become familiar with the technical manual and where to find the information they need to design, service and maintain the SAPPHIRE and FM200  Fire Suppression Systems

Course Information

•  Duration: 2 days
• Availability: USA, APAC / ME
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Practical Training for Gaseous Systems (incl. Inert & SAPPHIRE systems)

This 1-day course will cover the different hardware for the systems in questions.
Attendees will learn how to properly conduct installation, commissioning and maintenance.

The course will end with an exam and attendees will receive a certification.

Highlights

• Students will obtain hands-on training experience by having access to the available hardware components
• Service schedules and procedures will be shared

Course Information (CTT34GA)

• Duration: 1 day
• Availability: TechXchange Academies EMEA
• Target Audience: Authorized Distributors Only
• Certification: Certificate of Attendance

Available training sessions

You may find the list of the available training sessions here.
If you need further information, you may get in touch with us at training-emea@jci.com

Certification Training for High Pressure CO2 Systems

This 3-day course will cover CO2 as fire suppressant agent, the essential human safety considerations and the applications those systems are used for. 
Attendees will learn how to conduct a hazard analysis, get to know the hardware and the auxiliary peripherals required. The training content includes the hardware components for the CE marked (European) systems. Students will obtain hands-on training experience by having access to the available components. Participants will be guided through the necessary steps to design a system and will practice system design by working on design examples.
The course will end with an exam and attendees will receive a product certification which will allow commercial access to the High Pressure CO2 Fire Suppression Systems product portfolio.

Agenda
Day 1 & 2 (mandatory)

• application of the CO2 suppressant agents
• hardware section to explain the functions and features of all available hardware components
• overview of installation and maintenance requirements
• design rules for compliance with the relevant industry standards (EN 17966, ISO 6183, NFPA 12)
• individual exercises completing design examples
• multiple choice exam

Day 3 (optional)

• demonstration of the hydraulic flow calculation software

Course Information (CTT02CO)

• Duration: 3-days
• Availability: TechXchange Academies EMEA; On-Site at Customer location
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Available training sessions
You may find the list of the available training sessions here.
If you need further information, you may get in touch with us at training-emea@jci.com

Certification Training for Inert Systems with IGS-300 hardware components

This 3- day course will cover the different Inert agents (Nitrogen, Argon, IG-55, Inergen), environmental and human safety considerations and the applications those systems are used for. 
Attendees will learn how to conduct a hazard analysis, get to know the hardware and the auxiliary peripherals required. The training content includes the hardware components for the IGS-300 system. Students will obtain hands-on training experience by having access to the available components. Participants will be guided through the necessary steps to design a system and will practice system design by working on design examples.
The course will end with an exam and attendees will receive a product certification which will allow commercial access to the Inert Clean Agent Fire Suppression Systems product portfolio.

Agenda
Day 1 & 2 (mandatory)

• application of the inert gas suppressant agents
• a completely updated hardware section to explain the functions and features of the new hardware components
• overview of installation and maintenance requirements
• design rules for compliance with the relevant industry standards (EN 15004, ISO 14520, NFPA 2001)
• individual exercises completing design examples
• multiple choice exam

Day 3 (optional)

• explanation of the bill of material (BOM) generating tool
• demonstration of the hydraulic flow calculation software

Course Information (CTT02IN)

• Duration: 3-days
• Availability: TechXchange Academies EMEA; On-Site at Customer location
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Available training sessions
You may find the list of the available training sessions here.
If you need further information, you may get in touch with us at training-emea@jci.com

Re-Certification Training for Inert Systems with IGS-300 hardware components

This 1-day virtual session will cover the different Inert agents (Nitrogen, Argon, IG-55, Inergen), environmental and human safety considerations and the applications those systems are used for. 
Attendees will learn how to conduct a hazard analysis, get to know the hardware and the auxiliary peripherals required. The training content includes the hardware components for the IGS-300 system.

The course will end with an exam and attendees will receive a product certification which will allow commercial access to the Inert Clean Agent Fire Suppression Systems product portfolio.

Agenda

• application of the inert gas suppressant agents
• a completely updated hardware section to explain the functions and features of the new hardware components
• design rules for compliance with the relevant industry standards (EN 15004, ISO 14520, NFPA 2001)
• multiple choice exam

Course Information (CTT02IN)

• Duration: 1-day
• Availability: VILT (Virtual Instructor-Led Training)
• Target Audience: Authorized Distributors, that hold a valid certificate or expired not more than 6 months
• Certification: Product Certification

Available training sessions

You may find the list of the available training sessions here.
If you need further information, you may get in touch with us at training-emea@jci.com

Certification Training for SAPPHIRE Systems

This 3-day course will cover the FK-5-1-12 halocarbon fire suppressant agent, the environmental and human safety considerations and the applications those systems are used for. 
Attendees will learn how to conduct a hazard analysis, get to know the hardware and the auxiliary peripherals required. The training content includes the hardware components for the 25 bar, 42 bar SAPPHIRE and the 70 bar SAPPHIRE PLUS systems. Students will obtain hands-on training experience by having access to the available components. Participants will be guided through the necessary steps to design a system and will practice system design by working on design examples.
The course will end with an exam and attendees will receive a product certification which will allow commercial access to the SAPPHIRE Clean Agent Fire Suppression Systems product portfolio.

Agenda
Day 1 & 2 (mandatory)

• application of the halocarbon suppressant agents
• hardware section to explain the functions and features of all available hardware components
• overview of installation and maintenance requirements
• design rules for compliance with the relevant industry standards (EN 15004, ISO 14520, NFPA 2001)
• individual exercises completing design examples
• multiple choice exam

Day 3 (optional)

• explanation of the bill of material (BOM) generating tool (Suppression Design Center)
• demonstration of the hydraulic flow calculation software

Course Information (CTT02SAP)

• Duration: 3-days
• Availability: TechXchange Academies EMEA; On-Site at Customer location
• Target Audience: Authorized Distributors Only
• Certification: Product Certification

Available training sessions
You may find the list of the available training sessions here.
If you need further information, you may get in touch with us at training-emea@jci.com

Re-Certification Training for SAPPHIRE Systems

This 1-day course will cover the FK-5-1-12 halocarbon fire suppressant agent, the environmental and human safety considerations and the applications those systems are used for. 
Attendees will learn how to conduct a hazard analysis, get to know the hardware and the auxiliary peripherals required. The training content includes the hardware components for the 25 bar, 42 bar SAPPHIRE and the 70 bar SAPPHIRE PLUS systems.

The course will end with an exam and attendees will receive a product certification which will allow commercial access to the SAPPHIRE Clean Agent Fire Suppression Systems product portfolio.

Agenda

• application of the halocarbon suppressant agents
• hardware section to explain the functions and features of all available hardware components
• design rules for compliance with the relevant industry standards (EN 15004, ISO 14520, NFPA 2001)
  
• multiple choice exam

Course Information (CTT02SAP)

• Duration: 1-day
• Availability: VILT (Virtual Instructor-Led Training)
• Target Audience: Authorized Distributors, that hold a valid certificate or expired not more than 6 months
• Certification: Product Certification

Available training sessions

You may find the list of the available training sessions here.
If you need further information, you may get in touch with us at training-emea@jci.com